I flipped them on their sides and used my glue roller to apply an even coat of glue over all of them, then clamped them together. NOTE: make sure you keep the sticks in the same order when ripping them down and setting aside.Īt my workbench, I arranged the sticks by flipping every other one over to make a chevron pattern. With the angle being so sharp, I used a push block to make sure I was able to hold the wood against the fence and also safely slide it past the blade. I went back over to my table saw and again ripped it down into 1″ sticks. I cut more waste off than I had wanted, so definitely make sure your sticks are offset more than I offset mine. Using a speed square, I set up my adaptive cutting system to cut the end of the panel off at a 45 degree angle. Once the panel was dry, I took it out of the clamps and sanded it down smooth.
I clamped the ends as well to ensure everything fit tightly together and let it dry for a few hours. I applied glue to the veneer face of the plywood and then clamped the pieces together with the edge facing up, revealing the plys in the wood. I set up my parallel clamps on my workbench and placed the sticks on the clamps, staggering them as they will be cut at a 45 degree angle once the glue dries. I cut a piece down to size with my Adaptive Cutting System, then moved over to my table saw and ripped down 1″ wide sticks of the plywood. To make the patterned plywood foot rest, I used baltic birch plywood. Stain the board in desired color and let dry.Īttach the hairpin legs with 3/4″ wood screws and you’re ready to go! Patterned Plywood Foot Rest Once I marked the hole locations with a pencil, I used a scratch awl to pierce the wood at the center of the marks. Place hairpin legs evenly on each corner of the board. Sand the wood down with 220 grit sandpaper on both sides and all edges.
I used a scrap 1×10 board for this foot rest. To build a simple office foot rest, cut a board down to about 15″ long. I put together a YouTube video to show you how I made each of the foot rests. I wanted to have a little fun with some new to me techniques, making a patterned plywood foot rest for myself! It was super fun and I’ve put together a whole tutorial on building both types of office foot rests. That being said, I couldn’t leave it at just that. Just a simple board cut to size and some hairpin legs. This foot rest is super simple to build with very minimal materials and is perfect for all skill levels. If you purchase an item from one of these links, I will receive a small commission at no extra cost to you. *I’ve included affiliate links to the products I used in this project. I decided to build a second foot rest for him as well and it’s a little bit taller so he feels a little more comfortable while working at my computer. My oldest is super tall, so he has no issue at all with his feet reaching the ground at his desk, but my youngest isn’t that tall yet. With schools closed to in-person learning right now, my boys are also distance learning at home, which means they’re in front of the computers while they are also in school.
I decided I wanted to build an office foot rest to make myself a little more comfortable while I’m working at my computer. I’m not exactly tall, so it’s always a little uncomfortable to sit for any period of time at my desk, as my feet don’t fully reach the floor. This foot rest is simple to build or you can dress it up with special wood.īeing a DIY blogger means I spend a lot of time in my workshop building things, but once those projects are finished, I end up spending a lot of time at my desk editing photos, videos, and typing up tutorials like this one.
Foot rest under desk costco how to#
Learn how to build an office foot rest to keep yourself comfortable while you work from home or your kids as they are practicing virtual learning.
0 kommentar(er)
